Electronically Storing a Laser Height Value as an Attribute in Terra Sync
=========================================================================

1. Go to Setup / External Sensors.

2. Tap the Properties button on the right side for Sensor 1 or 2.

3. If desired, create another name for the sensor, i.e. Laser Height

4. Communications parameters: COM 1 (typical), 4800, 8, 1, None

5. Data Identification: Prefix String = HT, ; Suffix String = ,F (or M); 
	Max Bytes = blank; Time Out = 0.10 s

6. Receive Mode: Unsolicited; Logging Intervals = All for all Feature types

7. Data Destination: As Attribute

8. Attribute Name: must match *exactly* with the numeric attribute Name in 
	the Data Dictionary to be used, i.e. Height.

*** NOTE: if you are also capturing an AZ & HD offset to the feature with 
	our LPS, you may experience a Com Port conflict. You'll need to go 
	to the Setup / External Sensor screen and check or uncheck whichever
	one you want to use or not use.