Criterion/GeoLaser pinout information



When the battery pack connector is viewed from the outside, Pin 1 is at the

top (even with the "red mark") and Pins 2-5 are located in a counter-

clockwise progression.



The mating cable plug is: LEMO FGG.1B.305.CNAD72Z

The plug's cable strain relief is: LEMO GMA.1B.065DV

When viewing this connector from the outside, Pin 1 is at the "red mark" and

Pins 2-5 are located in a clockwise progression.



Pins 1 and 2 supply power to the Laser and should not be connected in the 

download cable.



Pin 3 is Serial In or Rx

Pin 4 is Serial Out or Tx

Pin 5 is Serial Ground